Reagent concentration effects in the REM resin solid phase synthesis of tertiary amines

The use of reagent concentration has resulted in increased rates for all stages of the REM resin synthesis of tertiary amines. These increases in rate translate into faster reaction times, higher yields and lower reagent consumption. Of the methods examined, the most successful was the use of perfluorous solvents, either alone or with a small amount of organic co-solvent.     

用光学差分吸收光谱监测大气中污染气体浓度

在实验室内模拟测量了实际大气中污染气体的差分吸收光谱 (DOAS) .本文在介绍差分吸收光谱技术同时 ,分析计算了污染气体的浓度 .实验设计中被测气体为大气中的 2种主要污染气体 :工业锅炉的主要排放物SO2 和机动车尾气的主要成分NO .用氘灯作为光源测量其在紫外波段的特征吸收 ,并通过光纤束连接光栅光谱仪 ,由计算机自动采集和处理数据 .     

Thermodynamic and surface properties of Sb-Sn and In-Sn liquid alloys

The thermodynamic properties of Sb-Sn and In-Sn liquid alloys have been studied using the quasi-chemical model for compound forming binary alloys and that for simple regular alloys. The concentration fluctuation S _cc(0) and the Warren-Cowley short-range order parameter (α ₁) were determined for the whole concentration range at a temperature of 770 K. The surface tensions of these liquid alloys were determined for the whole concentration range by using energetics determined from thermodynamic calculations. In all calculations, In-Sn manifested properties very close to alloys of ideal mixing, while Sb-Sn showed properties that are asymmetric about equiatomic composition. Our results suggest that a weak complex of the form SbSn₂ could be present in the Sb-Sn alloy at a temperature of about 770 K.     

抛物面式太阳能聚能系统聚光特性模拟

结合集热器的光学特性,本文应用蒙特卡罗法对理想的槽型和碟型两种抛物面集热器在不同焦距、不同边缘角时焦面上的热流密度进行了计算,获得了焦距、边缘角和聚光比之间的关系。在考虑太阳不平行度、跟踪指向误差、镜面的反射误差条件下,对碟型抛物面太阳能聚能系统的辐射特性进行了数值模拟分析,获得了吸收器壁面热流分布以及边缘角对焦面热流分布的影响,为太阳能聚能系统的设计和安装提供参考依据。     

磁性微珠的制备及其在生物样品分离富集中的应用

磁性微珠作为一种新型的功能材料,广泛应用于磁性材料、生物医学、细胞学、生物工程及分离工程等诸多领域,并显示出强大的生命力。本文对磁性微珠的结构、性质、制备方法及其在生物样品的分离富集等方面的应用,进行了总结和评述,引用文献62篇。     

Synthesis of Polyacrylaminothiourea Chelating Fiber and Properties of Concentration and Separation of Trace Noble Metal Ions from Samples

A novel polyacrylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber), which was applied to preconcentrate and separate of trace amount of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ） and Ir (Ⅳ） ions from solution of samples.The analyzed ions can be quantitatively concentrated by the fiber up to a flow rate of 20.0mL/min at pH2, and can also be desorbed with 15 mL of 4mol/L HCl 3% thiourea from the fiber column with recoveries of 96.5%-100%.The chelating fiber can be reused for ten times,the recoveries of these ions are still over 92%,and hundred to thousand times of excess of Fe(Ⅲ）,Al（Ⅲ）,Ca(Ⅱ），Mg（Ⅱ）,Ni(Ⅱ）,Mn（Ⅱ),Cu(Ⅱ），Zn(Ⅱ），and Cd(Ⅱ） cause no interference on the determination of the analyzed ions by inductively-coupled plasma atomic emission spectrometry (ICP-AES).The static saturation adsorption capacities of the fiber for the analytes are in the range of 1.15-2.80mmol/g.The relative standard deviations for the determination of 20.0ng/mL each of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ）and Ir(Ⅳ） are in the range of 0.7%-3.0%.The recoveries for test from standard additions to real solution samples are between 96% and 100%.The concentration of each ion in powder sample detected by the method is in good agreement with the certified value.     

两亲嵌段共聚物聚乙二醇-聚谷氨酸苄酯纳米粒药物载体的合成研究

用磺酸酯法制备单端氨基聚乙二醇引发剂,引发谷氨酸苄酯羧酸酐开环聚合,生成可生物降解的两亲嵌段共聚物聚乙二醇﹣聚谷氨酸苄酯(PEG-PBLG),用IR,NMR和GPC表征了共聚物。用超微透析法制备PEG-PBLG聚合物纳米粒,荧光芘探针法测定纳米粒的临界聚集浓度(cac)。紫外分光光度计考察纳米粒对疏水性药物的增溶作用,PEG-PBLG可作为亚微粒药物输送系统的载体。     

Concentrations of Active Species in the Flowing Afterglow of a Nitrogen Microwave Plasma

Measurements of nitrogen atom density, by means of NO chemical titration, along with an evaluation of the densities of some excited species N ₂ (B, v=11), N ₂ (B, v=2), N ₂ (C, v=0), and N ₂ ⁺ (B,v=0), by means of a spectroscopic study of some bands of dinitrogen, are achieved along the flowing afterglow of a dinitrogen microwave plasma (2450 MHz) for several pressures. The concentrations obtained are in the following range: [N]10 ⁺¹⁵ , [N ₂ (B, 2)]10 ⁺⁹ –10 ⁺¹⁰ , [N ₂ (B, 11)]10 ⁺⁸ –10 ⁺⁹ , [N ₂ (C, 0)]10 ⁺⁶ –10 ⁺⁷ , [N ₂ ⁺ (B,0)]10 ⁺⁶ -10 ⁺⁸ (cm^-3). From a kinetic study of the formation and decay of excited and charged species, an estimation of N ₂ (A, v), N ₂ (X, v, and N ₂ ⁺ (X) densities can be derived: [N ₂ (A, v)]10 ⁺¹² , [N ₂ (X, v6)]10 ⁺¹⁵ –10 ⁺¹⁶ , [N ₂ (X, v12)]10 ⁺¹⁴ –10 ⁺¹⁵ , [N ₂ ⁺ (X)]10 ⁺¹⁰ (cm ^-3 ).     

Size of Micelles Determined by Static Fluorescence Quenching

We developed a new method to measure the average aggregation number of large rod-like micelles using static fluorescence self-quenching of a solubilized fluorophore. The method is based on the increase of self-quenching of micelle-solubilized pyrene through excimer formation. We consider the effect of random distribution of pyrene in micelles and the micellar size distribution. The measured average aggregation <n> _M is based on a new M-weighted raging similar to our exponential-weighted averaging in the transient decay method. We apply this method to study the effect of a large concentration of salt on the average aggregation behavior of sodium dodecyl sulfate (SDS) and cetyle tetraammonium bromide (CTAB). The sizes increase with increasing ionic concentrations. For SDS, we used the thermodynamic model developed by Missel et al. to calculate < n > _M which we compare with experimental results.